[2019-08-17 00:07:03]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:07:03]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:07:03]     INFO:  Resetting the light injection box...
[2019-08-17 00:07:03]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:07:03]    DEBUG:   ... done.
[2019-08-17 00:07:03]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:07:03]     INFO:  Resetting the light injection box...
[2019-08-17 00:07:03]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:07:03]    DEBUG:   ... done.
[2019-08-17 00:07:03]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:07:03]    DEBUG:       ... done.
[2019-08-17 00:07:03]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:07:19]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:07:19]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:07:19]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 5
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0005_linjc_v09_1908170507
      ET port: 1201

[2019-08-17 00:07:19]     INFO:     minervadaq command:
[2019-08-17 00:07:19]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0005_linjc_v09_1908170507 -p 1201 -g 1000 -m 3 -r 30209 -s 5 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:07:19]     INFO:      ==> Started successfully.
[2019-08-17 00:07:19]     INFO:     ==>  Process id: 30094.
[2019-08-17 00:25:14]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:25:14]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:25:14]     INFO:  Resetting the light injection box...
[2019-08-17 00:25:14]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:25:14]    DEBUG:   ... done.
[2019-08-17 00:25:14]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:25:14]     INFO:  Resetting the light injection box...
[2019-08-17 00:25:14]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:25:14]    DEBUG:   ... done.
[2019-08-17 00:25:14]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:25:14]    DEBUG:       ... done.
[2019-08-17 00:25:14]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:25:29]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:25:29]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:25:29]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 6
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0006_linjc_v09_1908170525
      ET port: 1202

[2019-08-17 00:25:29]     INFO:     minervadaq command:
[2019-08-17 00:25:29]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0006_linjc_v09_1908170525 -p 1202 -g 1000 -m 3 -r 30209 -s 6 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:25:29]     INFO:      ==> Started successfully.
[2019-08-17 00:25:30]     INFO:     ==>  Process id: 1561.
[2019-08-17 00:43:24]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:43:24]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:43:24]     INFO:  Resetting the light injection box...
[2019-08-17 00:43:24]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:43:24]    DEBUG:   ... done.
[2019-08-17 00:43:24]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:43:24]     INFO:  Resetting the light injection box...
[2019-08-17 00:43:24]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:43:24]    DEBUG:   ... done.
[2019-08-17 00:43:24]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:43:25]    DEBUG:       ... done.
[2019-08-17 00:43:25]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:43:40]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:43:40]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:43:40]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 7
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0007_linjc_v09_1908170543
      ET port: 1201

[2019-08-17 00:43:40]     INFO:     minervadaq command:
[2019-08-17 00:43:40]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0007_linjc_v09_1908170543 -p 1201 -g 1000 -m 3 -r 30209 -s 7 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:43:40]     INFO:      ==> Started successfully.
[2019-08-17 00:43:41]     INFO:     ==>  Process id: 5885.
[2019-08-17 00:54:54]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:54:54]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:54:54]     INFO:  Resetting the light injection box...
[2019-08-17 00:54:54]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:54:54]    DEBUG:   ... done.
[2019-08-17 00:54:54]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:54:54]     INFO:  Resetting the light injection box...
[2019-08-17 00:54:54]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:54:54]    DEBUG:   ... done.
[2019-08-17 00:54:54]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:54:54]    DEBUG:       ... done.
[2019-08-17 00:54:54]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:55:10]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:55:10]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:55:10]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 8
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0008_linjc_v09_1908170554
      ET port: 1202

[2019-08-17 00:55:10]     INFO:     minervadaq command:
[2019-08-17 00:55:10]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0008_linjc_v09_1908170554 -p 1202 -g 1000 -m 3 -r 30209 -s 8 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:55:10]     INFO:      ==> Started successfully.
[2019-08-17 00:55:10]     INFO:     ==>  Process id: 8579.
[2019-08-17 00:55:10]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:55:10]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:55:10]     INFO:  Resetting the light injection box...
[2019-08-17 00:55:10]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:55:10]    DEBUG:   ... done.
[2019-08-17 00:55:11]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:55:11]     INFO:  Resetting the light injection box...
[2019-08-17 00:55:11]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:55:11]    DEBUG:   ... done.
[2019-08-17 00:55:11]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:55:11]    DEBUG:       ... done.
[2019-08-17 00:55:11]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:55:33]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:55:33]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:55:33]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 9
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0009_linjc_v09_1908170555
      ET port: 1201

[2019-08-17 00:55:33]     INFO:     minervadaq command:
[2019-08-17 00:55:33]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0009_linjc_v09_1908170555 -p 1201 -g 1000 -m 3 -r 30209 -s 9 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:55:33]     INFO:      ==> Started successfully.
[2019-08-17 00:55:33]     INFO:     ==>  Process id: 8601.
[2019-08-17 00:55:34]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:55:34]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:55:34]     INFO:  Resetting the light injection box...
[2019-08-17 00:55:34]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:55:34]    DEBUG:   ... done.
[2019-08-17 00:55:34]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:55:34]     INFO:  Resetting the light injection box...
[2019-08-17 00:55:34]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:55:34]    DEBUG:   ... done.
[2019-08-17 00:55:34]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:55:34]    DEBUG:       ... done.
[2019-08-17 00:55:34]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:55:59]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:55:59]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:55:59]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 10
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0010_linjc_v09_1908170555
      ET port: 1202

[2019-08-17 00:55:59]     INFO:     minervadaq command:
[2019-08-17 00:55:59]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0010_linjc_v09_1908170555 -p 1202 -g 1000 -m 3 -r 30209 -s 10 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:55:59]     INFO:      ==> Started successfully.
[2019-08-17 00:55:59]     INFO:     ==>  Process id: 8623.
[2019-08-17 00:56:00]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:56:00]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:56:00]     INFO:  Resetting the light injection box...
[2019-08-17 00:56:00]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:56:00]    DEBUG:   ... done.
[2019-08-17 00:56:00]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:56:00]     INFO:  Resetting the light injection box...
[2019-08-17 00:56:00]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:56:00]    DEBUG:   ... done.
[2019-08-17 00:56:00]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:56:00]    DEBUG:       ... done.
[2019-08-17 00:56:00]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:56:25]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:56:25]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:56:25]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 11
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0011_linjc_v09_1908170556
      ET port: 1201

[2019-08-17 00:56:25]     INFO:     minervadaq command:
[2019-08-17 00:56:25]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0011_linjc_v09_1908170556 -p 1201 -g 1000 -m 3 -r 30209 -s 11 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:56:25]     INFO:      ==> Started successfully.
[2019-08-17 00:56:25]     INFO:     ==>  Process id: 8869.
[2019-08-17 00:56:25]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:56:25]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:56:25]     INFO:  Resetting the light injection box...
[2019-08-17 00:56:25]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:56:25]    DEBUG:   ... done.
[2019-08-17 00:56:25]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:56:25]     INFO:  Resetting the light injection box...
[2019-08-17 00:56:25]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:56:25]    DEBUG:   ... done.
[2019-08-17 00:56:25]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:56:26]    DEBUG:       ... done.
[2019-08-17 00:56:26]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:56:51]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:56:51]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:56:51]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 12
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0012_linjc_v09_1908170556
      ET port: 1202

[2019-08-17 00:56:51]     INFO:     minervadaq command:
[2019-08-17 00:56:51]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0012_linjc_v09_1908170556 -p 1202 -g 1000 -m 3 -r 30209 -s 12 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:56:51]     INFO:      ==> Started successfully.
[2019-08-17 00:56:51]     INFO:     ==>  Process id: 8891.
[2019-08-17 00:56:52]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:56:52]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:56:52]     INFO:  Resetting the light injection box...
[2019-08-17 00:56:52]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:56:52]    DEBUG:   ... done.
[2019-08-17 00:56:52]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:56:52]     INFO:  Resetting the light injection box...
[2019-08-17 00:56:52]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:56:52]    DEBUG:   ... done.
[2019-08-17 00:56:52]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:56:52]    DEBUG:       ... done.
[2019-08-17 00:56:52]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:57:18]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:57:18]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:57:18]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 13
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0013_linjc_v09_1908170556
      ET port: 1201

[2019-08-17 00:57:18]     INFO:     minervadaq command:
[2019-08-17 00:57:18]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0013_linjc_v09_1908170556 -p 1201 -g 1000 -m 3 -r 30209 -s 13 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:57:18]     INFO:      ==> Started successfully.
[2019-08-17 00:57:18]     INFO:     ==>  Process id: 9410.
[2019-08-17 00:57:19]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:57:19]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:57:19]     INFO:  Resetting the light injection box...
[2019-08-17 00:57:19]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:57:19]    DEBUG:   ... done.
[2019-08-17 00:57:19]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:57:19]     INFO:  Resetting the light injection box...
[2019-08-17 00:57:19]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:57:19]    DEBUG:   ... done.
[2019-08-17 00:57:19]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:57:19]    DEBUG:       ... done.
[2019-08-17 00:57:19]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:57:44]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:57:44]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:57:44]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 14
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0014_linjc_v09_1908170557
      ET port: 1202

[2019-08-17 00:57:44]     INFO:     minervadaq command:
[2019-08-17 00:57:44]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0014_linjc_v09_1908170557 -p 1202 -g 1000 -m 3 -r 30209 -s 14 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:57:44]     INFO:      ==> Started successfully.
[2019-08-17 00:57:44]     INFO:     ==>  Process id: 9432.
[2019-08-17 00:57:45]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:57:45]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:57:45]     INFO:  Resetting the light injection box...
[2019-08-17 00:57:45]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:57:45]    DEBUG:   ... done.
[2019-08-17 00:57:45]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:57:45]     INFO:  Resetting the light injection box...
[2019-08-17 00:57:45]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:57:45]    DEBUG:   ... done.
[2019-08-17 00:57:45]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:57:46]    DEBUG:       ... done.
[2019-08-17 00:57:46]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:58:10]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:58:10]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:58:10]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 15
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0015_linjc_v09_1908170557
      ET port: 1201

[2019-08-17 00:58:10]     INFO:     minervadaq command:
[2019-08-17 00:58:10]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0015_linjc_v09_1908170557 -p 1201 -g 1000 -m 3 -r 30209 -s 15 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:58:10]     INFO:      ==> Started successfully.
[2019-08-17 00:58:10]     INFO:     ==>  Process id: 9533.
[2019-08-17 00:58:11]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:58:11]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:58:11]     INFO:  Resetting the light injection box...
[2019-08-17 00:58:11]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:58:11]    DEBUG:   ... done.
[2019-08-17 00:58:11]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:58:11]     INFO:  Resetting the light injection box...
[2019-08-17 00:58:11]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:58:11]    DEBUG:   ... done.
[2019-08-17 00:58:11]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:58:11]    DEBUG:       ... done.
[2019-08-17 00:58:11]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:58:35]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:58:35]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:58:35]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 16
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0016_linjc_v09_1908170558
      ET port: 1202

[2019-08-17 00:58:35]     INFO:     minervadaq command:
[2019-08-17 00:58:35]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0016_linjc_v09_1908170558 -p 1202 -g 1000 -m 3 -r 30209 -s 16 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:58:35]     INFO:      ==> Started successfully.
[2019-08-17 00:58:35]     INFO:     ==>  Process id: 9555.
[2019-08-17 00:58:36]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:58:36]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:58:36]     INFO:  Resetting the light injection box...
[2019-08-17 00:58:36]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:58:36]    DEBUG:   ... done.
[2019-08-17 00:58:36]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:58:36]     INFO:  Resetting the light injection box...
[2019-08-17 00:58:36]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:58:36]    DEBUG:   ... done.
[2019-08-17 00:58:36]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:58:36]    DEBUG:       ... done.
[2019-08-17 00:58:36]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:59:01]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:59:01]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:59:01]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 17
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0017_linjc_v09_1908170558
      ET port: 1201

[2019-08-17 00:59:01]     INFO:     minervadaq command:
[2019-08-17 00:59:01]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0017_linjc_v09_1908170558 -p 1201 -g 1000 -m 3 -r 30209 -s 17 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:59:01]     INFO:      ==> Started successfully.
[2019-08-17 00:59:01]     INFO:     ==>  Process id: 9577.
[2019-08-17 00:59:02]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:59:02]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:59:02]     INFO:  Resetting the light injection box...
[2019-08-17 00:59:02]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:59:02]    DEBUG:   ... done.
[2019-08-17 00:59:02]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:59:02]     INFO:  Resetting the light injection box...
[2019-08-17 00:59:02]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:59:02]    DEBUG:   ... done.
[2019-08-17 00:59:02]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:59:02]    DEBUG:       ... done.
[2019-08-17 00:59:02]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:59:27]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:59:27]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:59:27]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 18
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0018_linjc_v09_1908170559
      ET port: 1202

[2019-08-17 00:59:27]     INFO:     minervadaq command:
[2019-08-17 00:59:27]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0018_linjc_v09_1908170559 -p 1202 -g 1000 -m 3 -r 30209 -s 18 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:59:27]     INFO:      ==> Started successfully.
[2019-08-17 00:59:27]     INFO:     ==>  Process id: 9605.
[2019-08-17 00:59:27]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:59:27]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:59:27]     INFO:  Resetting the light injection box...
[2019-08-17 00:59:27]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:59:27]    DEBUG:   ... done.
[2019-08-17 00:59:27]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:59:27]     INFO:  Resetting the light injection box...
[2019-08-17 00:59:27]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:59:27]    DEBUG:   ... done.
[2019-08-17 00:59:27]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:59:28]    DEBUG:       ... done.
[2019-08-17 00:59:28]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 00:59:49]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 00:59:49]     INFO:     ==> No DAQ process to stop.
[2019-08-17 00:59:49]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 19
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0019_linjc_v09_1908170559
      ET port: 1201

[2019-08-17 00:59:49]     INFO:     minervadaq command:
[2019-08-17 00:59:49]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0019_linjc_v09_1908170559 -p 1201 -g 1000 -m 3 -r 30209 -s 19 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 00:59:49]     INFO:      ==> Started successfully.
[2019-08-17 00:59:49]     INFO:     ==>  Process id: 9627.
[2019-08-17 00:59:50]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 00:59:50]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 00:59:50]     INFO:  Resetting the light injection box...
[2019-08-17 00:59:50]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:59:50]    DEBUG:   ... done.
[2019-08-17 00:59:50]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 00:59:50]     INFO:  Resetting the light injection box...
[2019-08-17 00:59:50]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 00:59:50]    DEBUG:   ... done.
[2019-08-17 00:59:50]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 00:59:50]    DEBUG:       ... done.
[2019-08-17 00:59:50]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:00:10]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:00:10]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:00:10]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 20
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0020_linjc_v09_1908170559
      ET port: 1202

[2019-08-17 01:00:10]     INFO:     minervadaq command:
[2019-08-17 01:00:10]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0020_linjc_v09_1908170559 -p 1202 -g 1000 -m 3 -r 30209 -s 20 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:00:10]     INFO:      ==> Started successfully.
[2019-08-17 01:00:10]     INFO:     ==>  Process id: 10268.
[2019-08-17 01:00:11]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:00:11]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:00:11]     INFO:  Resetting the light injection box...
[2019-08-17 01:00:11]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:00:11]    DEBUG:   ... done.
[2019-08-17 01:00:11]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:00:11]     INFO:  Resetting the light injection box...
[2019-08-17 01:00:11]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:00:11]    DEBUG:   ... done.
[2019-08-17 01:00:11]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:00:11]    DEBUG:       ... done.
[2019-08-17 01:00:11]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:00:31]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:00:31]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:00:31]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 21
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0021_linjc_v09_1908170600
      ET port: 1201

[2019-08-17 01:00:31]     INFO:     minervadaq command:
[2019-08-17 01:00:31]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0021_linjc_v09_1908170600 -p 1201 -g 1000 -m 3 -r 30209 -s 21 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:00:31]     INFO:      ==> Started successfully.
[2019-08-17 01:00:31]     INFO:     ==>  Process id: 10304.
[2019-08-17 01:00:32]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:00:32]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:00:32]     INFO:  Resetting the light injection box...
[2019-08-17 01:00:32]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:00:32]    DEBUG:   ... done.
[2019-08-17 01:00:32]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:00:32]     INFO:  Resetting the light injection box...
[2019-08-17 01:00:32]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:00:32]    DEBUG:   ... done.
[2019-08-17 01:00:32]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:00:32]    DEBUG:       ... done.
[2019-08-17 01:00:32]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:00:53]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:00:53]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:00:53]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 22
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0022_linjc_v09_1908170600
      ET port: 1202

[2019-08-17 01:00:53]     INFO:     minervadaq command:
[2019-08-17 01:00:53]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0022_linjc_v09_1908170600 -p 1202 -g 1000 -m 3 -r 30209 -s 22 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:00:53]     INFO:      ==> Started successfully.
[2019-08-17 01:00:53]     INFO:     ==>  Process id: 10326.
[2019-08-17 01:00:54]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:00:54]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:00:54]     INFO:  Resetting the light injection box...
[2019-08-17 01:00:54]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:00:54]    DEBUG:   ... done.
[2019-08-17 01:00:54]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:00:54]     INFO:  Resetting the light injection box...
[2019-08-17 01:00:54]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:00:54]    DEBUG:   ... done.
[2019-08-17 01:00:54]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:00:55]    DEBUG:       ... done.
[2019-08-17 01:00:55]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:01:15]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:01:15]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:01:15]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 23
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0023_linjc_v09_1908170600
      ET port: 1201

[2019-08-17 01:01:15]     INFO:     minervadaq command:
[2019-08-17 01:01:15]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0023_linjc_v09_1908170600 -p 1201 -g 1000 -m 3 -r 30209 -s 23 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:01:15]     INFO:      ==> Started successfully.
[2019-08-17 01:01:15]     INFO:     ==>  Process id: 10369.
[2019-08-17 01:01:16]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:01:16]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:01:16]     INFO:  Resetting the light injection box...
[2019-08-17 01:01:16]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:01:16]    DEBUG:   ... done.
[2019-08-17 01:01:16]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:01:16]     INFO:  Resetting the light injection box...
[2019-08-17 01:01:16]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:01:16]    DEBUG:   ... done.
[2019-08-17 01:01:16]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:01:16]    DEBUG:       ... done.
[2019-08-17 01:01:16]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:01:37]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:01:37]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:01:37]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 24
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0024_linjc_v09_1908170601
      ET port: 1202

[2019-08-17 01:01:37]     INFO:     minervadaq command:
[2019-08-17 01:01:37]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0024_linjc_v09_1908170601 -p 1202 -g 1000 -m 3 -r 30209 -s 24 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:01:37]     INFO:      ==> Started successfully.
[2019-08-17 01:01:37]     INFO:     ==>  Process id: 10525.
[2019-08-17 01:01:38]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:01:38]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:01:38]     INFO:  Resetting the light injection box...
[2019-08-17 01:01:38]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:01:38]    DEBUG:   ... done.
[2019-08-17 01:01:38]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:01:38]     INFO:  Resetting the light injection box...
[2019-08-17 01:01:38]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:01:38]    DEBUG:   ... done.
[2019-08-17 01:01:38]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:01:38]    DEBUG:       ... done.
[2019-08-17 01:01:38]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:01:59]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:01:59]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:01:59]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 25
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0025_linjc_v09_1908170601
      ET port: 1201

[2019-08-17 01:01:59]     INFO:     minervadaq command:
[2019-08-17 01:01:59]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0025_linjc_v09_1908170601 -p 1201 -g 1000 -m 3 -r 30209 -s 25 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:01:59]     INFO:      ==> Started successfully.
[2019-08-17 01:01:59]     INFO:     ==>  Process id: 10547.
[2019-08-17 01:02:00]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:02:00]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:02:00]     INFO:  Resetting the light injection box...
[2019-08-17 01:02:00]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:02:00]    DEBUG:   ... done.
[2019-08-17 01:02:00]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:02:00]     INFO:  Resetting the light injection box...
[2019-08-17 01:02:00]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:02:00]    DEBUG:   ... done.
[2019-08-17 01:02:00]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:02:00]    DEBUG:       ... done.
[2019-08-17 01:02:00]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:02:21]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:02:21]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:02:21]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 26
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0026_linjc_v09_1908170602
      ET port: 1202

[2019-08-17 01:02:21]     INFO:     minervadaq command:
[2019-08-17 01:02:21]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0026_linjc_v09_1908170602 -p 1202 -g 1000 -m 3 -r 30209 -s 26 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:02:21]     INFO:      ==> Started successfully.
[2019-08-17 01:02:21]     INFO:     ==>  Process id: 10649.
[2019-08-17 01:02:22]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:02:22]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:02:22]     INFO:  Resetting the light injection box...
[2019-08-17 01:02:22]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:02:22]    DEBUG:   ... done.
[2019-08-17 01:02:22]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:02:22]     INFO:  Resetting the light injection box...
[2019-08-17 01:02:22]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:02:22]    DEBUG:   ... done.
[2019-08-17 01:02:22]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:02:22]    DEBUG:       ... done.
[2019-08-17 01:02:22]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:02:43]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:02:43]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:02:43]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 27
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0027_linjc_v09_1908170602
      ET port: 1201

[2019-08-17 01:02:43]     INFO:     minervadaq command:
[2019-08-17 01:02:43]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0027_linjc_v09_1908170602 -p 1201 -g 1000 -m 3 -r 30209 -s 27 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:02:43]     INFO:      ==> Started successfully.
[2019-08-17 01:02:43]     INFO:     ==>  Process id: 10670.
[2019-08-17 01:02:44]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:02:44]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:02:44]     INFO:  Resetting the light injection box...
[2019-08-17 01:02:44]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:02:44]    DEBUG:   ... done.
[2019-08-17 01:02:44]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:02:44]     INFO:  Resetting the light injection box...
[2019-08-17 01:02:44]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:02:44]    DEBUG:   ... done.
[2019-08-17 01:02:44]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:02:44]    DEBUG:       ... done.
[2019-08-17 01:02:44]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:03:05]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:03:05]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:03:05]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 28
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0028_linjc_v09_1908170602
      ET port: 1202

[2019-08-17 01:03:05]     INFO:     minervadaq command:
[2019-08-17 01:03:05]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0028_linjc_v09_1908170602 -p 1202 -g 1000 -m 3 -r 30209 -s 28 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:03:05]     INFO:      ==> Started successfully.
[2019-08-17 01:03:05]     INFO:     ==>  Process id: 11252.
[2019-08-17 01:03:06]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:03:06]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:03:06]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:06]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:06]    DEBUG:   ... done.
[2019-08-17 01:03:06]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:03:06]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:06]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:06]    DEBUG:   ... done.
[2019-08-17 01:03:06]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:03:06]    DEBUG:       ... done.
[2019-08-17 01:03:06]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:03:28]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:03:28]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:03:28]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 29
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0029_linjc_v09_1908170603
      ET port: 1201

[2019-08-17 01:03:28]     INFO:     minervadaq command:
[2019-08-17 01:03:28]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0029_linjc_v09_1908170603 -p 1201 -g 1000 -m 3 -r 30209 -s 29 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:03:28]     INFO:      ==> Started successfully.
[2019-08-17 01:03:28]     INFO:     ==>  Process id: 11298.
[2019-08-17 01:03:28]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:03:28]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:03:28]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:29]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:29]    DEBUG:   ... done.
[2019-08-17 01:03:29]    DEBUG:  Configuring LI using parameters: Max PE, ABCD
[2019-08-17 01:03:29]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:29]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:29]    DEBUG:   ... done.
[2019-08-17 01:03:29]     INFO:  Client wants the light injection system configured as follows:
  LI level: Max PE
  LED groups enabled: ABCD
[2019-08-17 01:03:29]    DEBUG:       ... done.
[2019-08-17 01:03:29]     INFO:       Commands issued to the LI box:
aE0
aE0
aB3
aB3
aCf_f
aCf_f
aO
aO
aD7
aD7
aQ
aQ
[2019-08-17 01:03:51]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:03:51]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:03:51]     INFO:  Manager wants to start the DAQ process.
   Configuration:
      Run number: 30209
      Subrun number: 30
      Number of gates: 1000
      Run mode: Light injection
      Detector: Full MINERvA
      Number of CROCs: 60
      LI level: Max PE
      LED group: ABCD
      HW init level: Full HW init
      ET file: MV_00030209_0030_linjc_v09_1908170603
      ET port: 1202

[2019-08-17 01:03:51]     INFO:     minervadaq command:
[2019-08-17 01:03:51]     INFO:        '/work/software/croce/minervadaq/minervadaq/bin/minervadaq -et MV_00030209_0030_linjc_v09_1908170603 -p 1202 -g 1000 -m 3 -r 30209 -s 30 -d 32 -dc 60 -ll 2 -lg 8 -hw 1 -cf hvon.hwcfg '...
[2019-08-17 01:03:51]     INFO:      ==> Started successfully.
[2019-08-17 01:03:51]     INFO:     ==>  Process id: 11320.
[2019-08-17 01:03:51]     INFO:  DAQ subprocess finished.  Check its logfile for more details.
[2019-08-17 01:03:51]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:03:51]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:51]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:51]    DEBUG:   ... done.
[2019-08-17 01:03:52]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:03:52]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:52]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:52]    DEBUG:   ... done.
[2019-08-17 01:03:52]     INFO:  Manager wants high voltage details of front-end boards.
[2019-08-17 01:03:52]     INFO:  sc_init:start
[2019-08-17 01:03:52]     INFO:  sc_init:end
[2019-08-17 01:03:52]    ERROR:  Error trying to read the voltages:
Traceback (most recent call last):
  File "ReadoutDispatcher.py", line 388, in sc_readboards
    croc_feblist, croce_feblist = sc.HVReadAll(0)		# we want ALL boards, that is, those that deviate from target HV by at least 0...
  File "/work/software/mnvconfigurator/SlowControlE2cr2CRC/SC_MainMethods.py", line 735, in HVReadAll
    hvCROCEs=SC_MainObjects.FEB(0).GetAllHVParams(self.vmeCROCEs, 'CROCE', int(devVal))
  File "/work/software/mnvconfigurator/SlowControlE2cr2CRC/SC_MainObjects.py", line 1230, in GetAllHVParams
    theDescription=theFEB.FPGADescription(theCROCXChannelX, theCROCX, theType))
  File "/work/software/mnvconfigurator/SlowControlE2cr2CRC/SC_MainObjects.py", line 909, in FPGARead
    Frame.DeviceFPGA, theCROCXChannelX, dw='D32', useBLT=True, includeCRC=theIncludeCRC, theDescription=theDescription)
  File "/work/software/mnvconfigurator/SlowControlE2cr2CRC/SC_MainObjects.py", line 1869, in WriteSendReceiveCROCE
    SendFIFOAndCheckStatusCROCE(theCROCEChannelE, theDescription=theDescription)
  File "/work/software/mnvconfigurator/SlowControlE2cr2CRC/SC_MainObjects.py", line 1945, in SendFIFOAndCheckStatusCROCE
    %(theCROCEChannelE.Description(),theDescription,['0x'+hex(d)[2:].rjust(4,'0') for d in data]))
Exception: CHE:0 FPGA:1,0,7,0 SendFIFOAndCheckStatusCROCE Error ReadAllRegisters=['0x014a', '0x0273', '0x0001', '0x1019', '0x2410', '0x000c', '0x0761'], should be [0x00XX,0xXXXX,0x0001,0x1010,0x2410,0xXXXX,0xXXXX]
[2019-08-17 01:03:53]  WARNING:  No read performed.
[2019-08-17 01:03:53]     INFO:  Manager wants to stop the DAQ process.
[2019-08-17 01:03:53]     INFO:     ==> No DAQ process to stop.
[2019-08-17 01:03:53]    DEBUG:  Configuring LI using parameters: Zero PE, ABCD
[2019-08-17 01:03:53]     INFO:  Resetting the light injection box...
[2019-08-17 01:03:53]     INFO:   ... used LI commands:
_X
_X
[2019-08-17 01:03:53]    DEBUG:   ... done.